Projekt:PiBa2-Mini: Unterschied zwischen den Versionen

Projekt:PiBa2-Mini (Quelltext anzeigen)

Version vom 16. Mai 2017, 18:17 Uhr

2.140 Bytes hinzugefügt , 16. Mai 2017

Alt-Geber

Dg3hda

mitglieder, vorstand

1.621

Bearbeitungen

@@ Zeile 247: / Zeile 247: @@
 cube([4,20,35],center=true);
 };
+</pre>
+=== Alternativer Geber, nur zum Test ===
+<pre>
+// sirenenkörper
+//Ausgelegt für China-Vibrationsmotor
+difference(){
+cylinder(h = 48, r = 31,$fn=100);
+//Verjüngung Druckvorrat
+translate([0,0,17])
+cylinder(h=4,r1=7,r2=3,$fn=100);
+//Druckvorrat
+cylinder(h = 17, r = 7,$fn=50);
+//Mittelachszylinder, Motoraufnahme, Stator
+cylinder(h = 48, r = 2.9,$fn=50);
+//Kabeldurchführung
+translate([4,4,17])
+cylinder(h=31,r=1.2,$fn=50);
+//aktive Hörner
+translate([0,32,25])
+rotate([90,0,0])
+linear_extrude(height = 8, scale = 0.5/18) square([30,45],center=true);
+translate([0,32,25])
+rotate([90,0,0])
+linear_extrude(height = 33, scale = 0.5/18) square([18,28],center=true);
+translate([0,-32,25])
+rotate([90,0,180])
+linear_extrude(height = 8, scale = 0.5/18) square([30,45],center=true);
+translate([0,-32,25])
+rotate([90,0,180])
+linear_extrude(height = 33, scale = 0.5/18) square([18,28],center=true);
+//passive Hörner
+translate([-32,-0,25])
+rotate([90,0,90])
+linear_extrude(height = 8, scale = 0.5/18) square([30,45],center=true);
+translate([-32,-0,25])
+rotate([90,0,90])
+linear_extrude(height = 28, scale = 0.5/18) square([19,28],center=true);
+translate([32,0,25])
+rotate([90,0,270])
+linear_extrude(height = 8, scale = 0.5/18) square([30,45],center=true);
+translate([32,0,25])
+rotate([90,0,270])
+linear_extrude(height = 28, scale = 0.5/18) square([19,28],center=true);
+};
+//dummychopper
+//translate([0,0,25])
+//cylinder(h=3.5, r=2.45,$fn=50,center=true);
+//Fuß
+//difference(){
+//translate([0,0,-30])
+//cylinder(h=30,r1=10,r2=31,$fn=100);
+//translate([0,0,-30])
+//cylinder(h=30,r=7,$fn=100);
+//};
+difference(){
+translate([0,0,-30])
+cylinder(h=30,r1=10,r2=31,$fn=100);
+translate([0,0,-30])
+cylinder(h=30,r=7,$fn=100);
+};
+//Ansatz
+difference(){
+translate([0,0,-50])
+cylinder(h=20,r=8,$fn=100);
+translate([0,0,-50])
+cylinder(h=30,r1=6.5,r2=7,$fn=100);
+};
+//versteifung
+translate([0,6,-16])
+rotate([0,0,0])
+cube([2,4,68],true);
+translate([0,-6,-16])
+rotate([0,0,180])
+cube([2,4,68],true);
+translate([6,-0,-16])
+rotate([0,0,90])
+cube([2,4,68],true);
+translate([-6,0,-16])
+rotate([0,0,270])
+cube([2,4,68],true);
 </pre>