JuMaPro

Code schön fein säuberlich im Wiki abgelegt

int punkt;

void setup()
{
  pinMode(2, OUTPUT);      // KATHODE 1
  pinMode(3, OUTPUT);      // KATHODE 2
  pinMode(4, OUTPUT);      // KATHODE 3
  pinMode(5, OUTPUT);      // ANODE 1
  pinMode(6, OUTPUT);      // ANODE 2
  pinMode(7, OUTPUT);      // ANODE 3
}

void loop(){
for(punkt=0;punkt<=50;punkt++){
a();delay(1);aus();
e();delay(1);aus();
i();delay(1);aus();
}
for(punkt=0;punkt<=50;punkt++){
d();delay(1);aus();
e();delay(1);aus();
f();delay(1);aus();
}
for(punkt=0;punkt<=50;punkt++){
g();delay(1);aus();
e();delay(1);aus();
c();delay(1);aus();
}
for(punkt=0;punkt<=50;punkt++){
b();delay(1);aus();
e();delay(1);aus();
h();delay(1);aus();
}
}

void aus(){
  digitalWrite(2, HIGH);
  digitalWrite(3, HIGH);
  digitalWrite(4, HIGH);
  digitalWrite(5, LOW);
  digitalWrite(6, LOW);
  digitalWrite(7, LOW);
  }
  

void a(){
  digitalWrite(2, LOW);
  digitalWrite(5, HIGH);
}

void b(){
  digitalWrite(2, LOW);
  digitalWrite(6, HIGH);
}

void c(){
  digitalWrite(2, LOW);
  digitalWrite(7, HIGH);
}

void d(){
  digitalWrite(3, LOW);
  digitalWrite(5, HIGH);
}

void e(){
  digitalWrite(3, LOW);
  digitalWrite(6, HIGH);
}

void f(){
  digitalWrite(3, LOW);
  digitalWrite(7, HIGH);
}

void g(){
  digitalWrite(4, LOW);
  digitalWrite(5, HIGH);
}

void h(){
  digitalWrite(4, LOW);
  digitalWrite(6, HIGH);
}

void i(){
  digitalWrite(4, LOW);
  digitalWrite(7, HIGH);
}